2CH Universal RX Multi Garage Door Remote Control Receiver 433MHz 868MHz Tuya WiFi Switch DC AC 9-30V 85-250V Smart Life Alexa

Warm Tip.

You can choose two versions: WIFI+RF version and RF version, you can choose two voltages: AC DC 9-30V AC 85-250V.

WIFI + RF VERSION

HIGHLIGHT

[ APP Remote Control ] -WIFI Smart Garage Receiver can be controlled via smart life&Tuya Smart APP on your Phone/Tablet anywhere and anytime.
[ RF Control ] – Compatible with many different codes (fixed code, rolling code, learning code), different frequencies of the remote control (300-900MHz),Please contact us for details of compatible brands.
[ Hand Free Voice Control ] -WIFI Smart Garage Receiver can also connect with your amazon alexa and google home,simple a voice command to control it.
[ Schedule & Count Down Function ] -You can create schedule according to your personal requirement ,as well as count down function,smart and DIY your daily life to the maximum extend.
[ Working mode ] – Momentary.
[Family Share Function] Create a smart home together with your family member.
[ Easy to be installed ] – A great external receiver that's easy to install and simple to use

Working frequency: 300-900MHz(Rolling code & Fixed code)

300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz

Can identify ALL Fixed code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning code (1527, 2240, 6P20B, 6P20D and so on), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101),

Parameters:

Input voltage：DC/AC 9V~30V AC85-250V
Max.Current:2200W/10A
Radio Frequency:300-900MHz
Codes: Working with any fixed and rolling code remote control
Working temperature: -20℃~70℃
Programming: press and hold the learn button on the receiver few seconds. Then hold and press
the remote control button to programming.
Delete code: Press and hold the delete code about 20 seconds.

WARM REMINDER

Checklist before using the device
Your smart phone or tablet has connected to a2.4g WiFi with internet.
You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
You have the correct WiFi PWD.
You smart phone or tablet must have access to APPstore,Google play.
Your router is MAC-open

RF VERSION

Universal Multi frequency 300-868mhz garage gate door receiver

Working frequency: 300-900MHz(Rolling code & Fixed code)

300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz

Can identify ALL Fixed code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning code (1527, 2240, 6P20B, 6P20D and so on), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101),

Some Brand remote controls (ATA PTX4, APRIMATIC, ALLMATIC, BENINCA, DEA, ECOSTAR, ERREKA, FOX, GIBIDI, HORMANN Blue button, LIFTMASTER, NOVOFERM, PUJOL, SEAV, SOMMER, VDS….)

Specifications:

1)Name: Universal receiver SMG-662.
2)Operating Voltage: 9V-30V AC 85-250V
3)Channel: 2.
4)Frequency: 300MHz – 900MHz.
5) Distance: 30-50 meters.
6) Very mini size: 5.5cm*4.5cm*1.0cm.
7) One receiver can work with 400 codes.
8) It don’t interference other remotes and receivers.
9) Brand selector: With 8 dip switches user can make different combination for different remote brands.
10)Code: Rolling and Fixed code & Learning code.
11)Uses: Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.
12) Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.

Programming a new remote

1) Select the correct brand for remote to be programmed by moving dip switches UP or DOWN. For example 433,92Mhz Marantec remote controls, just move Dip-switch 7 UP.

2) Press the learn button. The will LED turn on.

3) Press the button on the remote, the LED flashes 4 times. It means that remote control was programmed successfully.

4) Repeat step 2 for another button.

5)The 2-nd channel programming procedure is the same.

Erase all data from the memory card: Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered

Work with 433MHz 1527 learning code remote control

In order to better adapt to our receiver, it is recommended to choose to buy our remote control
Note: no battery include