- Is Smart Device: No
- DC Voltage: 3.7V
- Measuring Capacitance Range: 25-100
- Measuring Resistance Range: 0.01-50
- Model Number: LCR-TC1
- Dimensions: 1.8inch
- Operating Temperature: 0 – 40 ℃
- Measuring Inductance Range: 0.01 mH-20H
- Display Type: LCD Display
- DIY Supplies: ELECTRICAL
- Origin: Mainland China
- Certification: CE
• 1.8 inch TFT LCD display: The product features a large 1.8 inch TFT LCD display that makes it easy to read and use.
• Multi-functional: This multimeter is not just a resistor tester, but also a capacitor, diode, and transistor tester, making it a versatile tool for electrical professionals.
• Wide Operating Temperature Range: The product can withstand temperatures ranging from 0 to 40 degrees Celsius, making it suitable for use in a variety of environments.
• CE Certified: The product is certified by CE, ensuring that it meets the safety and quality standards set by the European Union.
• Large 1.8 inch TFT LCD display: The product features a large 1.8 inch TFT LCD display that provides clear and easy-to-read results.
• Dual Functionality as a Multimeter and Transistor Tester: This product is a versatile tool that can be used as both a multimeter and transistor tester, making it a valuable addition to any electronics enthusiast’s toolkit.
• Wide Operating Temperature Range: With an operating temperature range of 0-40 degrees Celsius, this product can be used in a variety of environments and is suitable for both hot and cold conditions.
• CE Certification: This product has been certified by CE, ensuring that it meets the highest safety and quality standards.
Transistor tester
Automatic detection of NPN and PNP bipolartransistors.N-channel and P-chmnnel MOSFETs,JFETs diodes(including double Diodes)N.and P-IGBTS, resisiors, Inductors, capacitors, thyristors,triac and battery (0 .1-4.50V) Automatie detection of zener diode (0.01-20v). Self test with automatic calibration
IR decoder
Support Hitachi IR coding
IR waveform display
Other
Measurement results using TFT graphic display(160×128)
Auto Power Off(Timeout Settable)
Built-in rechargeable Li-ion Battery
Li-ion Battery voltage detection- 160×128 TFT display
Power on
In the power off state, short press the multifunction key, the tester is turnedon and automatically measured.
IR dcoder
After the component test is completed, point the infrared remote control at the “IR” test hole of the tester, press the remote control button, the tester will display the user code and data code after successful decoding, and display the corresponding infrared waveform.
If the decoding fails or the decoding fails, the user code and data code cannot be displayed. At this time, if you are in the tester interface, you cannot enter the infrared decoding interface. If you are in the infrared decoding interface, the last successful decoding information will still be displayed.
Detect Zener Diode
When the device is turned off or the test is completed, put the Zener diode into the Zener diode test area, press the locking handle, and briefly press the multi-function button.
Automatic calibration
Short-circuit three test sockets, short press the multi-function button, and the tester will automatically calibrate.
During the calibration process, there is no need to perform other operations except to disconnect the short wire according to the prompts.
Shutdown
Automatic shutdown after timeout
When the component test is completed or the infrared decoding is completed, and the automatic shutdown time is reached, the tester will automatically shut down (overtime 30 seconds)
Standby power consumption is 0 UA after shutdown.
Battery voltage measurement
Before each component measurement, the built-in lithium battery voltage will be detected and displayed. When the battery voltage is less than 3.1V, it will be forced to shut down. Please charge it at this time.
t***t –
screen broken
j***z –
muito obrigado recebi produto. assim que possivel vou testar. obrigado.
I***v –
Доволі не поганий тестер. Я вже протестив, працює добре. дані показує швидко і доволі точно. в київ приїхав укрпоштою зпа) 16 днів.
24loop Shopper –
Хороший товар, всё соответствует описанию, быстрая доставка товара, товар пришол целым, продовца и сам товар рекомендую.
J***s –
Chegou sem problemas. O dispositivo parece estar funcionando normalmente. Achei a bateria pequena, mas ainda não sei durabilidade real.
J***a –
Ótimo produto
Т***ч –
всё круто
R***. –
A encomenda chegou bem rápido. O aparelho é muito funcional, apesar do meu ter vindo com a linguagem em Mandarim, mas não é nada que atrapalhe no fim das contas, pois as informações vitais dos componentes aparecem em inglês padrão, só mensagens padrões como “Componente desconhecido ou danificado ” que estão assim.
E***a –
Chegou bem rápido
l***s –
Excelente! Testado e aprovado.
24loop Shopper –
el producto llegó rápido a mi querido Perú a Bellavista Callao
F***e –
Muito bom, recomendo o vendedor!
L***y –
Produto é bom, sempre compro quando tem promoção para revender. Produto útil para todos técnicos ter em bancada. Produto chega conforme foto e com os acessório. Uma dica, se o produto chegar em chinês é só deixar o botão “start” apertado alguns segundos que ele muda para o idioma inglês.
K***o –
Excelente equipamento para teste de componentes, funciona muito bom, recomendo a todos!
Chegou bem rápido no Brasil.
24loop Shopper –
V***o –
посылка пришла . тестер ТС-1. ничего особенного . пока всё замеряет . стабилитроны не мерял – судя по отзывам – без доработок – попадалово . при вскрытии увидел – процессор затёрт . шифруются . батарея на 300мАч . продавца рекомендую, респект .
R***a –
Muito bom pra quem é da área. entrega rápida e preço justo. LULA LADRÃO E BOLSONARO TAMBÉM.
B***r –
chegou tudo certo e bem rápido parabéns ao vendedor
S***z –
Very good tool, quick and easy to use.
I***s –
muito o produto gostei recomendo!