RS Trianglelab 115W High Power CHC Pro Kit Ceramic Heating Core Quick Heating For Ender 3 Volcano Hotend CR10 mk3s blv

▉Name:

Trianglelab CHC(Ceramic Heating Core) Pro KIT

（CHC® is a registered trademark of our company）

Technical details:Please click here!

▉FAQs about CHC/CHC pro:

Please click here!

▉Compatible:

Volcano Hotend

CR10 Hotend

Hemera Htend

Matrix Extruder

Tatan AERO

DDB-Volcano Hotend KIT

*Built-in 104NT-4-R025H42G Thermal

* 5 : 100K thermistor – ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup)

#define TEMP_SENSOR_0 5

▉Repetier:

ATC Semitec 104GT-2

▉Klipper documentation:

sensor_type: ATC Semitec 104NT-4-R025H42G

▉Durt 3D:

M305 P1 T100000 B4658 C6.5338987554e-08

https://forum.duet3d.com/topic/7605/semitec-104nt-4r025h42g-solved/8

▉More information:

https://drive.google.com/drive/folders/11nulzVIvAlsGdDPtfe6u3rfM7EOrzPxF?usp=share_link

Ring Heating

Evenly heated to achieve 360° ring
heating ，Ceramic heating ring with built-in copper plated heating ring. The ceramic can
be heated evenly. Rapid heating. Realizes 360° ring heating.

Supports temperatures up to 300℃

ID09L16 ceramic heater power test

Roomtemperature 24℃

Controller BoardMKS BASE V1.4

Resistance at room temperature 5±1Ω 24V 115W MAX

Controller Boardpowervoltage24V DC

Firmware marlin2.0

No Firmwareheater power limiting

Read the temperature from the LCD

Record the power consumption onthe Lab PSU while passing certain temperatures

Please note that the temperatures in the table are thermistor embedded in the melting zone not the actual temperatures of the heating element especially at low temperatures.

The power in the table above has been deducted from the consumption of the controller board and LCD 1.03W.

*Built-in 104NT-4-R025H42G Thermal

Marlin Firmware Configuration

* 5:100K thermistor – ATC Semitec 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup)

#define TEMP_SENSOR_0 5

Repetier

ATC Semitec 10GT-2

Klipper

sensor_type: ATC Semitec 104NT-4-R025H42G

▉Features:

Cylindrical ceramic heaters can be optimized and symmetrically heated materials

The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end

Lightweight design, suitable for fast printing

Small compression size

Compatible with any V5/V6/CR10/HEMERA/MATRIX radiator, up to 300℃ degrees Celsius

▉Compatible:

Volcano Hotend

CR10 Hotend

Hemera Htend

Matrix Extruder

Tatan AERO

DDB-Volcano Hotend KIT

▉What's in the box:

Set1:CHC(Ceramic Heating Core) Pro No Nozzle 24V

Set2:CHC(Ceramic Heating Core) Pro Volcano Hotend 24V

*(The heatbreak is all-metal Heatbreak)

(0.4mm volcano nozzle)

Set3:CHC(Ceramic Heating Core) Pro
Hemera Hotend 24V

*(The heatbreak is stainless steel Heatbreak)

(0.4mm volcano nozzle)

Set4:CHC(Ceramic Heating Core) Pro CR-10 Hotend 24V

*(The heatbreak is titanium alloy Heatbreak)

(0.4mm volcano nozzle)

Set5:CHC(Ceramic Heating Core) Pro Nozzle 24V

(0.4mm volcano nozzle)