Universal Garage Door Remote Control Receiver 300MHz-868MHz RX MULTI Receiver 433 a 868 900 MHz 9-30V Controller Switch Command

Universal RX MULTI AC/DC 9-30V 300MHz-868MHz Receiver

Features

1. Receive stronger signal
2. One receiver can work 400 codes
3. Simple operation, better quality and trustworthy.
4. It will not interfere with other remotes and receivers
5. Compatible with multiple brands of remote controls

What brand of remote control can I learn?

This is the latest garage door remote control receiver developed by our company. It can learn 95% of garage door remote controls on the market. If you are not sure if it is compatible with your remote, you can send me a picture of your original remote , let me check it for you.

Note: We will not take any responsibility if you make a wrong purchase, thank you

Connect your motor or your controller to use

Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.

Replacing old garage control systems, or for adding more remotes to control garage doors

1. It can replace your garage door receiver
2, You can buy our receiver and remote control, the maximum working quantity of remote control is 400

How to adjust the correct learning code？

You can switch the dial code you need according to your remote control brand and frequency

How to program?

1, Brand selector: With 8 dip switches user can make different combination for different remote brands. 2, Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it is better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2 and 3; shorten 1and 2 if input less than 24V. 3, Programming procedure:
1) Select the correct brand for remote to be programmed by moving dip switches UP or DOWN. For 433,92Mhz Rolling Code remote controls, just move Dip-switch 5 UP. ( Contains manual)
2) Press the learn button. The will LED turn on.
3) Press the button on the remote, the LED flashes 4 times. It means that remote control was programmed successfully.
4) Repeat step 2 for another button. 4. The 2-nd channel programming procedure is the same. 4. Erase all data from the memory card: Press and hold either learn button. The LED will start flash. Keep this button pressed, until the LED will turn off. All saved data in the memory card will be erased permanently and can not be recovered

Include

Receiver
Small Antenna
English Manual

Description

1. Model：YNG140
2. Type of programming：Programming with the receiver.
3. Frequency：433MHz=433.92MHz
4. Code：1527 Learning Code.
5. Buttons：2 Buttons
6. Battery：CR2016 （Not Include Battery）

Note: This remote control cannot clone other remote control, it can only match the 1527 learning code receiver

This product does not have any operation manual , but you need an instruction manual for your device . Your device must support EV1527 learning code and support 433MHz at the same time . This means that you need to refer to the product manual of your own device for coding after purchase ( different products have different coding methods ) . So before buying , please confirm whether your device is suitable for our remote control.

This remote worked great with our receiver

4. Can I place a large order? Can it be customized

of course