WSDCAM Wireless Vibration Alarm with Remote Control Anti-Theft Alarm Door and Window Alarm Motorcycle Bicycle Security Sensors

WSDCAM Wireless Vibration Alarm with Remote Control Anti-Theft Alarm Door and Window Alarm Motorcycle Bicycle Security Sensors

Wireless vibration alarms with remote by detecting gentle touch, push or beat (vibration triggered)

• Remote control range up to 25M

• 10 levels adjustable sensitivity

• Add more remotes and alarms. You can program multi remotes for one alarm, also can program one remote for multi alarms.

• Low-consumption design,which makes it can work at least a year

• Alarm need two AAA batteries to operate ( not included )

• Remote need a 12V/27A alkaline batteries to operate ( included )

• 4 Mode– Arm/Disarm/Panic/Doorbell mode

• Not only a safety/antitheft alarm, but also a Doorbell, in doorbell mode, the vibration alarmdetects vibration the host sound"Dingdong"

• Low battery warning

• Package Size: 4.2*2.5*1.5 inch, Package Weight: 71g

Package Including:

1* Alarm, 1* Remote Control, 1* User Manual

• 10 levels adjustable sensitivity from gently touch to push or beat, you can easily set it according to your need

• Wireless Vibration Alarm triggered by vibration, suitable for Bikes, Motorcycles, Vehicle, Doors, Windows or anything you wish to protect, detering thieves effectively by 110dB loud alarm

Multipurpose Use

Not only suitable for Bikes, Motorcycles, Vehicle, but also designed for home, single apartment, rental housing, office, hotel, shop, mall and residential house.

• Easy operation and installation, installation by pasting with double-sided sticker or tying it with strap

Pair More Alarms &Remotes

Take batteries out of alarm

Put batteries into alarm, long press "bell" button on remote immediately until you hear "Bi",then release.

Press arm key , alarm will sound two "Bi.Bi". Done

Pairing method

3.6.1. Add the first remote control: First, remove the host battery and reinstall it after 1 minute. Press the [bell] button within 2 seconds and hold it down continuously for about 10 seconds. The host will emit a beep sound. This indicates that the host has entered the learning code mode. Then, release the [Bell] button and press the [arm] or [disarm] button again. The host will sound "Bi… Bi…" twice, indicating successful code learning. Now, the host can add remote controls.